National Association of Scientists <p>The National Association of Scientists is a scientific community that actively cooperates with scientists, investigates the problems of modern science, pays special attention to the development of relevant scientific directions. The policy of the National Association of Scientists is based on the availability of all information for experienced and novice scientists, undergraduates and graduate students, researchers and teachers of higher educational institutions, as well as interested readers of scientific literature.</p> en-US <h5><span id="CC_Attribution_—_No_Derivative_Works_(сокращённо_CC_BY-ND)" class="mw-headline">CC BY-ND</span></h5> <p><span class="mw-headline">A work licensed in this way allows the following:</span></p> <p><span class="wysiwyg-font-size-large"><strong>1. The freedom to use and perform the work:</strong> The licensee must be allowed to make any use, private or public, of the work.</span></p> <p><span class="wysiwyg-font-size-large"><strong>2. The freedom to study the work and apply the information:</strong> The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."</span></p> <p><span class="wysiwyg-font-size-large"><strong>2. The freedom to redistribute copies:</strong> Copies may be sold, swapped or given away for free, in the same form as the original.</span></p> Tue, 28 Dec 2021 14:19:00 +0000 OJS 60 BUILDING ON THE SLOPE. CONSTRUCTION SOLUTION (EXAMPLE INTERCONTINENTAL SHAHGHAI WONDERLAND SHANGHAI) <p>The principle of designing a building on slopes is considered. Design features of the given object, as well as identified the necessary measures for engineering training.</p> T. Shirokova , E. Biryukova Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 THE MECHANISMS OF THE DISTRIBUTION OF HYDROTHERMAL-METASOMATIC GOLD- BEARING FORMATIONS (EAST OF THE SIBERIAN PLATFORM) <p>Hydrothermal-metasomatic formations with Au content from 0.5 to 3.0 g/t, sometimes up to 24-32 g/t, were found in the east of the Siberian platform in the brecciated zones. They form, along ancient faults activated in the Mesozoic, extended narrow formations in terrigenous-carbonate and sandy layers of PZ-MZ age. The comparison of metasomatites with gold-ore metasomatites of the Kuranakh and Tabornoye deposits makes it possible for the first time to predict ore sources formed as a result of hydrothermal-metasomatic processes. Perhaps these sources represent a huge metallogenic potential.</p> Z. Nikiforova Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 CONCRETE STRENGTH RESEARCH WITH ADDITION OF A SOLID PRODUCT OF PYROLYSIS OF USED AUTOMOBILE TIRES AND FOUDNRY SLUDGE <p>The problem of the accumulation of oily waste appeared at the same time as mankind began the intensive development of the oil industry. This problem can be solved by developing new approaches to processing the accumulated volume of oily waste into products with useful properties. In this paper, a study of the strength of concrete made with the addition of a pyrolysis product of used car tires and foundry slag is given, in order to propose a new composition of building materials.</p> N. Sharipov , N. Scherbinin , R. Kalimullin , R. Galeev , G. Mavrin Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 MINERALIZATION OF WATER EXTRACT OF SOLID PYROLYSIS PRODUCTS <p>This paper proposes the use of a conductometric method for measuring the salinity of a water extract of solid pyrolysis products of carbon-containing waste (next SPP) and direct demineralization of the waste itself.</p> <p>As a result of the work carried out, the direct emission of pollutants, which are various salts, minerals and heavy metals, into the aqueous phase is demonstrated.</p> N. Shcherbinin , N. Sharipov , R. Kalimullin , G. Mavrin Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 PRINCIPLES OF SUBSTANTIATION OF GEOMETRIC ELEMENTS OF THE ROADBED DURING THE RECONSTRUCTION OF MOUNTAIN ROADS <p>This article discusses the principles of substantiating the width of the roadway and roadsides during the reconstruction of mountain roads, which include the most complete consideration of all factors affecting the choice of the optimal design solution.&nbsp;</p> <p>Analysis and consideration of the whole variety of factors influencing the choice of parameters of crosssection elements during the reconstruction of mountain roads makes it possible to determine the optimal values of the width of the carriageway and roadsides in specific road conditions with the help of a feasibility study.</p> R. Akhmedova , D. Selimkhanov , A. Abdullaev , K. Akhmedov Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 UNJACKED GLAZE BASED ON SUSPENSION OF QUARTZ SAND <table> <tbody> <tr> <td> <p>The article discusses various methods for the synthesis of jade glaze for majolica. As a result of the studies, the fundamental possibility of the synthesis of jade glazes based on both natural and artificial raw materials was established. The problems in this direction are identified and the goals of further research are determined.</p> </td> </tr> </tbody> </table> S. Ageeva Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 ESSENCE OF POSTINDUSTRIAL TECHNOLOGICAL ENVIRONMENTS AS A BASIS OF NONVIOLENT MONOPOLIZATION OF POWER IN RUSSIA <p>In the article presented the results of infiltrating in Russia a new self-reproducing mechanism of nonviolent monopolization of power, targeted for ensuring the stable development of the state under condition of exception of system repressions against elite groups. Presented the basic mathematic model, placed in a basis of this method.</p> <p>And also, the means of its practical application for establishing a named mechanism.</p> A. Denisov , E. Denisova Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 TOOL ERROR FOR MEASURING DEFORMATION OF CORE SAMPLES. <p>The paper considers the causes of errors in measuring deformation samples using special frames with strain gauges glued to rubber plates and fixed on the core and a method of compensating for temperature drift as the main factor affecting the quality of the results.</p> V. Kachalsky , E. Pavenko Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 APPLICATION OF THE MAPLE PACKAGE FOR CALCULATING THE RIBBED PLATE FOR STRENGTH, TAKING INTO ACCOUNT THE DISCRETE LOCATION OF THE RIBS <p>This paper presents an analytical calculation of the stress-strain state of a ribbed plate supported by a cross system of stiffeners. The calculation was carried out by the Ritz method using the Maple mathematical package</p> G Malinin Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 ON THE USE OF PREDICTIVE ANALYSIS TECHNIQUES TO PROTECT INFORMATION INFRASTRUCTURE <p>The aim of the work was an analytical review of intelligent technologies and methods with predictive potential for solving the problems of protecting information infrastructure, allowing you to create a more secure environment; some "secondary" problems for protection associated with the very methodology for the implementation of security measures are identified, and possible directions for solving.</p> N. Mironova Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 NDUCTOR OF SPECIAL DESIGN FOR HARDENING OF BEARING BALLS <p>The article presents the results of a study of an induction heating system with an inductor in the form of a cylindrical spiral, which allows to cover the ball for ball bearings from all sides as it is rolled along the inductor. Such a special design of the inductor allows for uniform heating of the surface of the ball.</p> N. Klochkova, A. Obukhova , A. Protsenko Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 ASSESSMENT OF THE TECHNICAL CONDITION OF PRODUCTION EQUIPMENT IN THE MACHINE INDUSTRY <p>The proper technical condition of production equipment used for production purposes plays a crucial role for industrial enterprises. One of the main tasks of engineers is the competent assessment of the technical condition of equipment, as well as its effective and rational use. Regularly performed maintenance and repair contribute to the increase of service life of technological equipment, elimination of failures in their operation, prevention of deviations of technological modes from the set parameters and are the guarantee of prompt performance of operations of technological processes. Therefore, when assessing the technical condition of the equipment, a whole system of maintenance and repair is necessary. Competently built this system will allow to achieve the most accurate indicators of technical condition.&nbsp;</p> E. Orlov Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 SUPPORT VECTOR REGRESSION WITH BAYESIAN PARAMETERS OPTIMIZATION FOR INCLINOMETER WELLS MEASUREMENTS REFINEMENT <p>This paper propose a method of inclinometer wells measurements refinement via support vector regression with Bayesian parameters optimization. The results demonstrate that the given method-based algorithm is efficient for wells inclinometer measurements correction.</p> A. Ryabov Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 PROBABLE APPROACH TO SAFETY ASSESSMENT INFORMATION FROM THREATS <p>It is well known that the main goal of information protection is to ensure a given level of its security. The specified level of information security is characterized by the state of its protection from threats, which provides an acceptable risk of its destruction, alteration, theft, and blocking.</p> <p>Risks depend on the level of engineering and technical protection of information&nbsp;(ITZI), which is determined by the resources of the system. The more resource for information protection, the higher the level of security. With an unlimited resource, you can get an arbitrarily small probability of a threat being realized.</p> M. Titov , P. Karasev , P. Pushkin , M. Titova Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000 MODEL OF HEAT GENERATION DURING DEFORMATION OF MEDIA WITH INTERNAL STRESSES <p>Observations of a solid body with internal stresses have been carried out, this model allows us to describe the energy dissipation during the change of the elastic stage of deformation to the plastic one. The dependence of heat release on the heat physical properties of the contacting structures is noted.</p> B. Zimin , A. Khitrina Copyright (c) 2022 Thu, 30 Dec 2021 00:00:00 +0000