MINERALIZATION OF WATER EXTRACT OF SOLID PYROLYSIS PRODUCTS

Authors

  • N. Shcherbinin Naberezhnye Chelny Institute of KAZAN (Volga) Federal University
  • N. Sharipov Naberezhnye Chelny Institute of KAZAN (Volga) Federal University
  • R. Kalimullin Naberezhnye Chelny Institute of KAZAN (Volga) Federal University
  • G. Mavrin Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

Keywords:

DW - Distilled water; PP - pyrolysis products; SPP - solid pyrolysis products of carbon containing wastes; BAC - birch activated carbon; SP - silt precipitation; SD - sawdust;UCT - used car tires; CM - chicken manure; Clay - clay-sand mixture; UST - ultrasonic treatment

Abstract

This paper proposes the use of a conductometric method for measuring the salinity of a water extract of solid pyrolysis products of carbon-containing waste (next SPP) and direct demineralization of the waste itself.

As a result of the work carried out, the direct emission of pollutants, which are various salts, minerals and heavy metals, into the aqueous phase is demonstrated.

Author Biographies

N. Shcherbinin , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

Second year master's student

N. Sharipov , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

Second year master's student

R. Kalimullin , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

Second year master's student

G. Mavrin , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

Head of department, Ph.D. (associate professor)

References

Konduktometrija. Konduktometricheskoe i vysokochastotnoe titrovanie: Metod. ukaz. k lab. rabotam / Sost. Stifatov B. M., Rublineckaja Ju. V. – Samara; Samar. gos. tehn. un-t, 2017. - 12 s.

Downloads

Published

2021-12-30

Issue

Vol. 1 No. 74 (2021)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.