ALGORITHM OF THE AUTOMATED SYSTEM FOR CALCULATING AND DESIGNING A REED RELAY
Keywords:
reed switch, relay, automatic project, dialog mode, optimizationAbstract
An automated system has been developed for calculating and designing a single- and multi-contact reed relays with an external magnetic circuit along the actual length of the reed switch - with shortening or bending of the contact cores. The computer system consists of two subsystems - working and optimizing. The system allows you to design a device with optimized parameters in a dialog mode with a computer, receiving the necessary information in the form of digital values
References
Оганесян А.Т. Система автоматизированного проектирования герконовых реле с оптимальными параметрами // Известия вузов. Электромеханика.– 2011,- Т.2, С. 53-55.
Hovhannisyan A.T., Qrmoyan N.M., Arzanyan R.G., Khachatryan V.H., Azatyan R.G. The calculation algorithm of the magnetoelectric induction generator with the change of the magnetic flux direction (II) // Рецензируемый научный журнал «Тенденции развития науки и образования».- Январь 2019.- №46, Часть 6.- С. 45-48.
Hovhannisyan A.T., Qrmoyan N.M., Arzanyan R.G., Khachatryan V.H., Azatyan R.G. Algorithm of machine calculation of magnetoelectric induction generator with the change of the magnetic flux direction and the results of the research (III) // Рецензируемый научный журнал «Тенденции развития науки и образования».- Февраль 2019.- №47, Часть 6.- С. 71-74.
Hovhannisyan A.T., Qrmoyan N.M., Arzanyan R.G., Khachatryan V.H., Azatyan R.G. The calculation algorithm of the magnetoelectric induction generator with a change of the magnetic flux value (2-II) // Рецензируемый научный журнал «Тенденции развития науки и образования».- Март 2019.- №48, Часть 7.- С. 91-95.
Hovhannisyan A.T., Qrmoyan N.M., Arzanyan R.G., Khachatryan V.H., Azatyan R.G. Algorithm of machine calculation of magnetoelectric induction generator with the change of the magnetic flux value and the results of the research (2-III) //Рецензируемый научный журнал «Тенденции развития науки и образования».- Март 2019.- №48, Часть 5.- С. 78-81.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.