ALGORITHM FOR SELECTING HEAT EXCHANGERS OF PIPE-IN-PIPE TYPE

Authors

  • N. Roshchupkin Lipetsk State Technical University
  • S. Suslova Lipetsk State Technical University

DOI:

https://doi.org/10.31618/nas.2413-5291.2021.2.63.362

Keywords:

pipe-in-pipe heat exchangers, heat exchange surface, heat exchanger selection algorithm, heat transfer

Abstract

The article discusses an algorithm for selecting a heat exchanger and calculating the heat exchange surface using a program in the Pascal ABC.NET language.

Author Biographies

N. Roshchupkin , Lipetsk State Technical University

student

S. Suslova , Lipetsk State Technical University

candidate of technical sciences, associate professor

References

Павлов К.Ф., Романков П.Г., Носков А.А. Примеры и задачи по курсу процессов и аппаратов химической технологии. Учебное пособие для вузов/Под ред. чл.-корр. АН СССР П.Г. Романкова. - 10-е изд., перераб. и доп.- Л.: Химия, 1987. - 576 с., ил.

УДК 621.181 Дытнерский Ю.И. Основные процессы и аппараты химической технологии: Пособие по проектированию - М.: Химия, 1991. — 496 с.

Касаткин А.Г. Основные процессы и аппараты химической технологии / 7-ое изд. - М.: Химиздат,

Downloads

Published

2021-03-19

Issue

Vol. 2 No. 36(63) (2021)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.