MATHEMATICAL APPARATUS FOR CALCULATION AND DESIGN REED SWITCHES

Authors

  • A. Hovhannisyan National Polytechnic University of Armenia
  • D. Martirosyan National Polytechnic University of Armenia
  • V. Sahakyan National Polytechnic University of Armenia

Keywords:

reed, relay, contact cores, cutting, bending, calculation, project

Abstract

The paper presents a mathematical apparatus for calculating and designing a single- and multi - contact reed relays with an external magnetic circuit along the actual length of the relay- with a cut to shorten or bend the contact cores.

Author Biographies

A. Hovhannisyan , National Polytechnic University of Armenia

candidate of technical Sciences, assistant pro

D. Martirosyan , National Polytechnic University of Armenia

Master

V. Sahakyan , National Polytechnic University of Armenia

Master

References

Шоффа В.Н. Герконы и герконовые аппараты: Справочник. - М.: Изд.- во МЭИ, 1993. 288 с.

Коробков Ю.С. Расчет и проектирование устройств на герконах: Герконовые реле. - М.: iElectro, 2010.- 52 с.

Hovhannisyan A.T., Muradyan S.M. The method of calculating direct current reed relay. Methodical guidelines for term paper and graduate work. State Engineering University of Armenia (Polytechnic), Yerevan, 2011. 44 p.

Оганесян А.Т. Система автоматизированного проектирования герконовых реле с оптимальными параметрами // Известия вузов. Электромеханика.– 2011,- Т.2, С. 53-55.

Оганесян А.Т., Григорян А.Х., Хачатрян Ш.Д. Влияние внешнего магнитопровода на магнитное поле обмоток прямоугольного и трапециевидного сечений // Актуальные проблемы гуманитарных и естественных наук.- М., 2015.- №12, ч.2.- С. 169-174.

Hovhannisyan A.T., Margaryan M.K., Harutyunyan L.G., Sargsyan S.Y., Avetisyan H.A. The impact of reed montage characteristics on the magnetic moving force of control winding // Рецензируемый научный журнал «Тенденции развития науки и образования».- Март 2020.- №59, ч. 1, 2020.- С. 83-88.

Downloads

Published

2020-12-08

Issue

Vol. 1 No. 34(61) (2020)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.