WHAT THE DENTIST RISKS – OCCUPATIONAL DISEASES
DOI:
https://doi.org/10.31618/nas.2413-5291.2020.2.61.321Keywords:
professional diseases of a dentist, dentistry, ergonomics in dentistryAbstract
The article is devoted to an overview of professional diseases in the work of a dentist. The aim of the study is to identify the most common diseases encountered by dentists associated with their professional activities, as well as recommendations for their prevention. In order to identify professional diseases, an anonymous survey was conducted of 59 dentists with various length of service in their specialty. For the survey. Monitoring of the data obtained during the survey made it possible to identify a complex of factors harmful to the health of doctors.
References
Бочаров Е.Ф. Проблема гепатитной инфекции в стоматологии // Е.Ф.Бочаров, В.И.Пухаев, Л.В.Быстрова // Стоматология. 1997. №5. – С.72-74.
Лакшин А.М., Катаева В.А. Общая гигиена с основами экологии человека: учебник //М.: Медицина, 2004. – С.364-394.
Профессиональные вредности в работе врача-стоматолога и профилактика последствий их воздействия: учебно-методическое пособие /Михальченко В.Ф., Темкин Э.С., Морозова Н.М., Калинина Н.В., Петрухин А.Г., Кондратенко А.А. //Волгоград, 1998. – 26с.
Состояние здоровья и условия труда врачей стоматологов: учеб.-метод. пособие /Лакшин А.М., Кич Д.И. //М.: РУДН, 2001. – 41с.
Янушевич О.О., Епифанов В.А, Иваненко Т.А., Дмитриева Н.Г. Профилактика и лечение профессиональных заболеваний стоматолога //Стоматология. 2007. №11. С.41-48.
Эйгин Л.Е. Социально-гигиенические исследования условий труда, быта и здоровья медицинских работников стоматологического профиля: автореф. дис. канд. мед. наук //М., 2000.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.