EFFICIENT USE OF PRODUCTION CAPACITY ON THE EXAMPLE OF A CHEMICAL WATER TREATMENT PLANT
Keywords:
utilization rate, production capacity, equipment, efficiency, economyAbstract
Production efficiency is a very important metric for productivity. One of the methods for evaluating production efficiency is the active power utilization ratio of equipment. The closer this figure is to 100%, the more production capacity is used, the smaller the difference between the actual volume of production and the potential volume of production, and the higher the quality of economic development. This article analyzes the efficiency of using the production capacity of the CHPP chemical water treatment plant.
References
Aleshin G.I., Fishman B.C. Kompleks rabot po snizheniyu energozatrat na predpriyatii // Promyshlennaya energetika, №9, 2017 – S.23-24.
Bashmakov I.A. Regionalnaya politika povysheniya energeticheskoj effektivnosti: ot problem k resheniyam. // Centr po effektivnomu ispolzovaniyu energii. M., 2016 – S.26-32.
Bashmakov I.A. Finansovyj i ekonomicheskij analiz proektov po povysheniyu effektivnosti ispolzovaniya energii.//Centr po effektivnomu ispolzovaniyu energii. — M., 2018 – S.16.
Kopejkin B.V., Smirnov E.A., Bagiev G.S. Effektivnost energosberezheniya: // Moskva, Energoatomizdat, 2015 – 120 s.
Nekrasov I.S. Elektrosnabzhenie promyshlennyh predpriyatij: metod. ukazaniya i zadaniya k kursovomu proektirovaniyu / I.S. Nekrasov, G.A. Shepel. – Arhangelsk: Izd-vo AGTU, 2006. – 79 s.
PUE-7. Data vvedeniya 2003-01-01. Utverzhdeno Ministerstvom energetiki Rossijskoj Federacii, prikaz ot 8 iyulya 2002 g. № 204. – 900 str.
Neklepaev B.N., Kryuchkov I.P. Elektricheskaya chast elektrostancij i podstancij: Spravochnye materialy dlya kursovogo i diplomnogo proektirovaniya: Ucheb. posobie dlya vuzov. – 4-e izd., pererab. i dop. – M.: Energoatomizdat, 1989. – 608 s.
Kabyshev A.V., Obuhov S.G. – Raschet i proektirovanie sistem elektrosnabzheniya obektov i ustanovok. Tomsk, TPU, 2006. -249s.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.