ARCHITECTURAL GRAPHICS AS A MEANS OF FORMING PROFESSIONAL COMPETENCIES OF THE ARCHITECT BASED ON THE STUDY OF ARCHITECTURAL HERITAGE MONUMENTS

Authors

  • M. Salyakhova Kazan State University of Architecture and Engineering

DOI:

https://doi.org/10.31618/nas.2413-5291.2020.1.61.316

Keywords:

methodology, architectural graphics, watercolors, architectural monument

Abstract

This article provides methodological recommendations for organizing practical design activities in the process of studying architectural heritage monuments, and also considers the possibilities of forming professional competencies of an architect student by means of architectural graphics.

Author Biography

M. Salyakhova , Kazan State University of Architecture and Engineering

Senior lecturer

References

Кринский В.Ф., Колбин В.С., Ламцов И.В., Туркус М.А., Филасов Н.В. Введение в архитектурное проектирование. Учебник для вузов. – М.: Изд-во «Стройиздат», 1974. – 176 с.

Тиц А.А. Загадки древнерусского чертежа. – М.:Изд-во «Стройиздат», 1978. – 151 с.

Кудряшев К.В. Графика (автор-составитель Кудряшева С.Д.):Учебное пособие. – М.:Архитектура-С, 2007 г. – 288 с.:илл.

Зайцев К.Г. Графика и архитектурное творчество. – М. «Стройиздат», 1979. – 340 с.

Айдаров С.С., Халиков А.Х., Юсупов Н.З. Память поколений. Очерки о памятниках истории и культуры Татарии. – Казань, 1980. – 180 c.

Мубаракшина Ф.Д. Архитектурная графика. Отмывка. Учебное пособие. Казань: КГАСУ ,2012. – 143 с.

Мубаракшина Ф.Д. Антураж в курсовом проектировании. Учебное пособие. – Казань: КГАСУ, 2009. – 72 с.

Куликов А.Д., Степанов А.В., Нечаев Н.Н. Архитектурный чертеж в развитии композиционного мышления архитектора. Учебное пособие. – Казань, 2002. – 150с.

Downloads

Published

2020-12-08

Issue

Vol. 1 No. 34(61) (2020)

Section

Статьи

License

Copyright (c) 2020 National Association of Scientists

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.