POSTINDUSTRIAL TECHNOLOGICAL ENVIRONMENTS AND GLOBAL TRIANGLE OF POWER

Authors

  • A. Denisov Institute for Design-technological informatics RAS
  • E. Denisova Special informational network «Labyrinth»

DOI:

https://doi.org/10.31618/nas.2413-5291.2021.1.73.494

Keywords:

New balance of powers in military field. Postindustrial technological environments. Global “triangle of power”. Military clans. Conflict. Political decisions.

Abstract

In article showed that in a world practically has been established fundamentally new configuration of balance of power in military field. In a center of which so called global “triangle of power” is situated, created by military clans of Russia, PRC and USA. The basis of this configuration is served to be more fundamental model of postindustrial technological environment.

References

Denisov A.A., Denisova E.V. Perexod k postindustrializmu I usloviya novogo balansa sil v voennoj oblasti. // // Informatsionnyye voyny. 2010; (3): 15-23. (In Russ).

Denisov A.A., Denisova E.V. Podavlenie tsiklov Boyida: Novyyi printsip upravleniya voennymi i politicheskimi konfliktami. // Informatsionnyye voyny. 2010; (3): 2-14. (In Russ).]

Razrabotka osnov metrologicheskogo obespecheniya konstruirovaniya abstraktnych soznaniyi dlya modelirovaniya i upravleniya soziumami. // Otchot po NIR. Tema № 34.1. Rukovoditel: k.t.n. A.A. Denisov. / М.: Institut konstruktorsko-tehnologicheskoyi informatiki RАN. 2015: 85. (In Russ).

Denisov A.A., Denisova E.V., Sablin V.А. Proektirovanie technologicheskih sred i postindustrialnaya revoluziya. // Ekonomicheskie strategii. 2019; 4(162): 25-33. (In Russ).

Denisov A.A., Denisova E.V. Cel’ I xarakter postindustrial’noj vojny. // Ekonomicheskie strategii. 2017; 7(149): 78-93. (In Russ)

O vozvedenii v Rossii Tret’ego Xrama Solomona. // Soobshhenie 719. / M.: Spezial’naya informacionnaya set’ Labirint, 8 ijynya 2020: 4. (In Russ)

Downloads

Published

2021-11-30

Issue

Vol. 1 No. 73 (2021)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.