CERTIFICATION AND ANALYSIS OF PARTICULARLY RESPONSIBLE TECHNOLOGICAL PROCESSES AT A MACHINE-BUILDING ENTERPRISE

Authors

  • M. Egorov Moscow state technological University “STANKIN”
  • A. Feofanov Moscow state technological University “STANKIN”

DOI:

https://doi.org/10.31618/nas.2413-5291.2021.1.73.496

Keywords:

technological process; validation; analysis; production; management; quality; standardization

Abstract

This article is devoted to technological processes at machine-building enterprises. Analysis of the effectiveness of the certification process and management of particularly responsible technological processes. Identification and definition of the technological process. Requirements for technological documentation

Author Biographies

M. Egorov , Moscow state technological University “STANKIN”

Post-graduate student of the  Department “Automated information  processing and management systems”

A. Feofanov , Moscow state technological University “STANKIN”

Doctor of technical Sciences, Professor, Professor of the  Department “Engineering graphics”

References

Bondarchuk N.D., Feofanov A.N., Bondarchuk E.Yu., Grishina T.G. /Povyshenie konkurentosposobnosti predpriyatiya s pomoshyu sovremennyh metodov upravleniya/ Vestnik sovremennyh tehnologij. 2017. № 2 (6). St. 9-15.

GOST 3.1109-2015. Edinaya sistema tehnologicheskoj dokumentacii. Terminy i opredeleniya osnovnyh ponyatij.

Denisenko V.V. Kompyuternoe upravlenie tehnologicheskim processom, eksperimentom, oborudovaniem. – M.: Goryachaya liniya – Telekom, 2009. St. 608.

Egorov M.K., Feofanov A.N. /Povyshenie effektivnosti deyatelnosti predpriyatiya na osnove primeneniya metoda dereva reshenij/ Avtomatizaciya i modelirovanie v proektirovanii i upravlenii. 2021. №1(11). St. 29-34

Osnovnye ponyatiya v upravlenii TP. URL: https://www.sites.google.com/view/utp-op/i-ponyatiyav-upravlenii-processami

Downloads

Published

2021-11-30

Issue

Vol. 1 No. 73 (2021)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.