APPLICATION OF THE PROCESS OF PYROLYSIS AND PURIFICATION OF NATURAL GAS FROM SULPHUR COMPOUNDS.
Keywords:
Natural gases, sulphur compounds, amines, adsorption, pyrolysis.Abstract
Despite continuous improvements in pyrolysis and the removal of sulphur compounds from natural gases, many policy issues remain unresolved. Among them, the main problem is the development of methods for removing undesirable mixtures from the gas, practically completely cleaning with environmental conditions . The study shows that one of the most promising techniques for cleaning natural gases with low sulphur content is adsorption, which also performs the drying process.
References
Salimov A.N. Process ochistki prirodnogo gaza ot soedinenij sery: modelirovanie, eksperimentalnye issledovaniya, opredelenie ekonomicheskoj effektivnosti. / Ministerstvo obrazovaniya Azerbajdzhanskoj Respubliki, Bakinskij gosudarstvennyj universitet Materialy II Respublikanskoj nauchnoj konferencii «Molodoj himik», 17 maya. 18, 2006, s. 47-48.
«Ochistka tehnologicheskih gazov». Pod. izd. Semenova T.A., Lejnisa I.L. Moskva, Himiya, 1977, 488 s.
Halilov E.N., Bagirov R.A. «Prirodnye ceolity, ih svojstva, proizvodstvo i primenenie». Izdatelstvo «Elm», Azerbajdzhan. Baku, 2002, 349 s.
Ibragimov Ch.Sh. K metodam proektirovaniya i upravleniya adsorb-cionnymi processami. Baku: izd.-vo «Elm» NAN Azerbajdzhana, 1989, 234 s.
Ibragimov Ch.Sh. O metodah opredeleniya osnovnyh parametrov dinamiki i kinetiki sorbcii. //Azerb. him. zhurn., 1981, №6, s. 27-32.
Beskov S.D. Tehnologicheskie raschety. Moskva, Vysshaya shkola, 1969, 520 s.
Ibragimov Ch.Sh. Adsorbcionnotehnologicheskie sistemy s obratnoj svyazyu: teoriya, modelirovanie i prakticheskie prilozheniya. Doktorskaya dissertaciya. Baku,
, 401 s.
Serpionova E.N. Promyshlennaya adsorbciya gazov i parov. Moskva, Vysshaya shkola, 1969, 414 s.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.