CONCRETE STRENGTH RESEARCH WITH ADDITION OF A SOLID PRODUCT OF PYROLYSIS OF USED AUTOMOBILE TIRES AND FOUDNRY SLUDGE

Authors

  • N. Sharipov Naberezhnye Chelny Institute of KAZAN (Volga) Federal University
  • N. Scherbinin Naberezhnye Chelny Institute of KAZAN (Volga) Federal University
  • R. Kalimullin Naberezhnye Chelny Institute of KAZAN (Volga) Federal University
  • R. Galeev Naberezhnye Chelny Institute of KAZAN (Volga) Federal University
  • G. Mavrin Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

Keywords:

oily waste; concrete; used car tires; foundry slag; building mixture; strength.

Abstract

The problem of the accumulation of oily waste appeared at the same time as mankind began the intensive development of the oil industry. This problem can be solved by developing new approaches to processing the accumulated volume of oily waste into products with useful properties. In this paper, a study of the strength of concrete made with the addition of a pyrolysis product of used car tires and foundry slag is given, in order to propose a new composition of building materials.

Author Biographies

N. Sharipov , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

2nd year master’s student

N. Scherbinin , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

2nd year master’s student

R. Kalimullin , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

2nd year master’s student

R. Galeev , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

Head of the Department, technical sciences candidate, docent

G. Mavrin , Naberezhnye Chelny Institute of KAZAN (Volga) Federal University

Head of the Department, chemical sciences candidate, docent

References

Issledovanie vozmozhnosti primenenija metoda piroliza dlja utilizacii neftjanyh othodov. [Jelektronnyj resurs]. – Rezhim dostupa: https://ztbo.ru/o-tbo/lit/pererabotka-promishlennixotxodov/pererabotka-neftesoderzhashix-otxodov (Data obrashhenija: 08.12.2021).

ITS 15-2016 «Utilizacija i obezvrezhivanie othodov (krome obezvrezhivanija termicheskim sposobom (szhiganie othodov)» - Bjuro NTD, Moskva, 2016, s. 4

GOST 10180-2012 Betony. Metody opredelenija prochnosti po kontrol'nym obrazcam.

GOST 10181-2014 Smesi betonnye. Metody ispytanij.

GOST 7473-2010 Smesi betonnye. Tehnicheskie uslovija (s popravkoj).

Beton i betonnye konstrukcii // Zotkin A.G. – Moskva, Izdatel'stvo Feniks, 2012. – s. 12-13

Downloads

Published

2021-12-30

Issue

Vol. 1 No. 74 (2021)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.