MODEL OF HEAT GENERATION DURING DEFORMATION OF MEDIA WITH INTERNAL STRESSES
DOI:
https://doi.org/10.31618/nas.2413-5291.2021.1.74.519Keywords:
internal stresses, heat generation during deformation, contact thermal disturbances.Abstract
Observations of a solid body with internal stresses have been carried out, this model allows us to describe the energy dissipation during the change of the elastic stage of deformation to the plastic one. The dependence of heat release on the heat physical properties of the contacting structures is noted.
References
I. A. Kunin. Teorija uprugih sred s mikrostrukturoj. Izdatel'stvo "Nauka". M., 1975.
s. (rus.).
L. I. Sedov. Mehanika sploshnyh sred, tom.1. Izdatel'stvo "Nauka". M., 1973. 536 s. (rus.).
I. A. Birger. Ostatochnye naprjazhenija. Izdatel'stvo Lenanda. M., 2015. 234 s. (rus.).
A.V. Lykov. Teorija teploprovodnosti. Izdatel'stvo "Vysshaja shkola". M., 1967. 599 s. (rus.).
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.
