A GENERAL OVERVIEW OF THE MAIN APEXES IN THE ORGANIZATION OF SAFE OPERATION OF PROCESS EQUIPMENT IN THE MACHINE-BUILDING INDUSTRY

Authors

  • K. Bulygin Northern (Arctic) Federal University named after M.V. Lomonosov

Keywords:

safety, equipment, operation, labor protection, rules.

Abstract

Compliance with the rules of technical operation of equipment is a significant part of production processes. Incidents and accidents of various scales at work often occur due to safety violations when working with production equipment both in Russia and abroad. The organization of safe operation of the equipment will reduce the number of accidents and casualties at work, and significantly improve the technical condition of the machines, maintain their high efficiency.

Author Biography

K. Bulygin , Northern (Arctic) Federal University named after M.V. Lomonosov

Bachelor

References

Bezopasnaja jekspluatacija tehnologicheskogo oborudovanija [Jelektronnyj resurs, mul'timedia]: uchebnoe posobie dlja bakalavrov dnevnogo i zaochnogo otdelenij po napravleniju «Tehnosfernaja bezopasnost'» (profil' «Bezopasnost' tehnologicheskih processov i proizvodstv») / V. Ja. Borshhev. – Tambov : Izd-vo FGBOU VO «TGTU», 2016. ISBN 978-5-8265-1587-7

Polozhenie. Obespechenie bezopasnosti proizvodstvennogo oborudovanija. POT RO-14000-002-98

Osnovy tehnologii mashinostroenija: uchebnik / A.M. Antimonov.— Ekaterinburg : Izdvo Ural. un-ta, 2017.— 176 s. ISBN 978-5-7996-2132-2

Postanovlenie Pravitel'stva Rossijskoj Federacii ot 23 maja 2000 g. n 399 «o normativnyh pravovyh aktah, soderzhashhih gosudarstvennye normativnye trebovanija ohrany truda»

Downloads

Published

2022-02-01

Issue

Vol. 2 No. 75 (2022)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.