AUTOMATION AND PLANNING OF PRODUCTION PROCESSES IN ENTERPRISES

Authors

  • B. Khastsaev FSBEO HE North-Caucasian institute of mining and metallurge (State Technological University)
  • A. Zasseev FSBEO HE North-Caucasian institute of mining and metallurge (State Technological University)

DOI:

https://doi.org/10.31618/nas.2413-5291.2020.1.61.308

Keywords:

enterprise, production automation, industrial robotics, automated control systems, flexible automated production

Abstract

The article discusses the main stages of development of production automation at enterprises, which is one of the most important achievements of modern science and technology in the field of industry. Automation of production provides a significant intensification of production, growth and improvement of production indicators, a noticeable increase in production efficiency with minimal expenditure of fuel, energy and labor resources.

Author Biographies

B. Khastsaev , FSBEO HE North-Caucasian institute of mining and metallurge (State Technological University)

Ph. D. in Economics, associate professor

A. Zasseev , FSBEO HE North-Caucasian institute of mining and metallurge (State Technological University)

graduate student

References

Брюханов, В.Н. Автоматизация производства. / В.Н. Брюханов. — М.: Высшая школа, 2016. — 367 c.

Иванов, А.А. Автоматизация технологических процессов и производств: Учебное пособие / А.А. Иванов. — М.: Форум, 2016. — 224 c.

Схиртладзе, А.Г. Автоматизация технологических процессов и производств: Учебник / А.Г. Схиртладзе, А.В. Федотов, В.Г. Хомченко. — М.: Абрис, 2018. — 565 c.

Схиртладзе, А.Г. Автоматизация Учебник для ВУЗов. / А.Г. Схиртладзе. — М.: технологических процессов и производств. Абрис, 2017. — 568 c.

Downloads

Published

2020-12-08

Issue

Vol. 1 No. 34(61) (2020)

Section

Статьи

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.